In the process of installation, Teflon plates basically have different installation methods, so in the process of application, they also have their own application methods. How to apply Teflon plates is what many friends want to know. In order to ensure that the tetrafluoro plate is convenient in the application process and all supports are exchanged, it is necessary to stop more useful connection at the beginning of the underframe connection. Besides stainless steel, there will be more steel grooves for the base price of all tetrafluoro plates. Through this method, a series of moisture-proof functions can be increased. At the same time, they can also increase the anti-seismic function through such a method. Then, in the process of stopping the device, there will be various different positions, or stopping the device in a certain deep groove environment. The Teflon plate must be paid special attention to in the process of stopping the device. It is necessary to set a dust cover on it. In addition, when all dust covers are applied, it is necessary to use a rubber sheet with a thickness of 5mm to stop the setting. There will be some stainless steel strips around it, and even stainless steel screws will be used to stop it. The layout of all rubber bearings is also different, Compared with some popular rubber bearings, they are also different. In terms of shape, rubber bearings can be divided into different examples. Compared with some spans, popular rubber bearings are less than 30m, and the displacement is relatively small. The tetrafluorocarbon plates with different planes are also different in the layout of side bridges in the process of stopping manufacturing. Therefore, they can not be replaced by some other data.
The source of this article is the Internet. It is only for sharing and exchange. It is not for commercial use. The copyright belongs to the original author and the source of the original author. If there is infringement, please contact to delete.
